Changing where items print out

This can be done in a number of ways depending on your set up in either PosLink or StockLink.

1. In PosLink where Printer Groups are used:
2. In PosLink on a till go into Programming.
3. Click Printer group, go into the group required and tick the printers you require in KP flags.
4. Ensure in terminal configuration that printer is also enabled under enabled KPs.

In PosLink where Printer Groups are not used:

1. In PosLink on a till go into Programming.
2. Click PLU. 
3. Select your PLU and untick the printer it is currently going to and tick the printer you want it to go to.
4. Ensure in terminal configuration that printer is also enabled under enabled KPs.

In StockLink where Printer Groups are used:

1. In StockLink go into POS Control, then click pos control again.
2. Click Printer group go into the group required and tick the printers you require in KP flags.
3. Ensure in terminal configuration that printer is also enabled under enabled KPs.
4. Save and send to the tills.

In StockLink where Printer Groups are not used:

1. In StockLink, click PLU. 
2. Select your PLU and untick the printer it is currently going to and tick the printer you want it to go to.
3. Ensure in terminal configuration that printer is also enabled under enabled KPs.
4. Save and send to the tills.